MODERATORSPolymer Clay Removable Armature. There are two types bulking out polymer clay armatures that exist - removable and non-removable. Below is a way that Anadrol bloat face found to make cornstarch packing peanut armatures easy to remove thus creating hollow clay sculptures. A step by step is probably not necessary but they are easy for me to follow. How to make an easily removable only if you need to make a hollow polymer clay sculpture.
Bulking Out: Polymer Clay Removable Armature [Archive] - HauntForum
Do not use armature materials that are painted or glazed. Do not attempt to use Styrofoam as an armature material. Heat causes it to expand and emit toxic fumes. Then, apply a third complete layer, adding finishing details, and re-bake for a final 15 minutes. Try to keep all parts of the sculpture of an even thickness of clay. Layering the clay is the best method to avoid cracking and maintain even thickness in a medium or large sculpture.
Over baking will cause hardening of the clay, and burning can cause bubbling and cracking. Do not fill the crack with uncured clay and put back into the oven to re-bake. This generally causes the crack to enlarge. The uncured clay does not fuse with the already cured clay.
It is dark gray, but can be sanded and under painted to match the clay. It hardens in a few minutes without heating. This makes a paste of the same color as the clay, which hardens without heat. It can also be sanded and painted. It is difficult to add on to any cured clay and re-bake. The cured clay does not re-melt and mix with the uncured clay, so separation will occur.
Pieces that break off or were not attached properly prior to baking will need to be glued on. Cracking is almost always caused by insufficient curing or by baking a sculpture with uneven thicknesses throughout. It is also very important to adhere to proper baking times and temperatures. Using an oven thermometer is the most accurate way to make sure your oven is heated to the exact temperature.
Always use a type of support under the clay if there are raised or extended portions, as the clay softens slightly in the oven before it hardens in the baking process. Without this support, the areas can sag or crack.
Fiberfill, crumpled aluminum foil, crumpled up paper towels or tissue paper, glass bowl to keep a curve in place , wooden dowels or wire supports could all be used as supports under the clay to keep it in place during baking.
If the clay is slightly dry, this can also cause cracking. Because the clays shrink less than 1 percent when baking, this does not lead to cracking except in cases where the layer is extremely thin, such as over a glass vessel. To prevent cracking and breaking, we also recommend that you do not expose the baked pieces to large temperature and humidity changes.
Sign up for the Sculpey newsletter and discover new products, new projects and exclusive crafting tutorials. Sign Up for Our Newsletter Sign up for our newsletter and get special sales, product sneak peeks, projects and more! Add a little fun to your inbox! Sign Up for our Newsletter And add a little fun to your inbox!